Hobbywing EzRun 18A Brushless ESC

1   Specification

1.1 Output: Continuous 18A, burst 50A.
1.2 Input: 4-9 cell NiMH/NiCd or 2-3S LiPo.  
1.3 BEC: 6V/1A (Linear mode built-in BEC).
1.4 Resistance: 0.01 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor.
1.6 Suitable Motor:  * Note #1
        With 4-6 cell NiMH/NiCd or 2S LiPo: On-Road≥12T,  Off-Road≥8T;
        With 6-9 cell NiMH/NiCd or 3S LiPo: On-Road≥18T,  Off-Road≥24T;
1.7 Suitable Car: 1/18 on-road sport.
1.8 Cooling Fan: Not included.
1.9 Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).
1.10 Weight:  19g (Without wires) 
* Note #1: These listed T numbers are available for 2040 size brushless motor (Ø=24, L=40) 
 
2   Features
 
2.1   Compatible with sensorless brushless motors.
2.2   Top quality components, high current endurance.
2.3   Excellent start-up, acceleration and linearity features.
2.4   Many programmable items. Suitable for various chassis, tires and racing tracks. 
2.5   Multiple protection features: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection.
2.6   Internal timing can be changed easily to make the ESC suitable for various motors.  
2.7   Easily programmable with LED program card (purchased separately) or LCD program box 

The options in italic font in the above table are the default settings of the ESC.
(* The programmable items and the default settings maybe changed in different firmware versions without prior notification.) 

PN: Ezrun-18A-SL