Diatone Mamba F405 MK3 Lite Betaflight Flight Controller 30x30mm (Hết hàng)

Diatone Mamba F405 MK3 Lite Betaflight Flight Controller 30x30mm

Specifications

MCU: 168MHz STM32F405RGT6
IMU: MPU6000
Barometer: No
OSD: Yes
Black box: 16M Flash Memory
Number of serial ports: 5Set
Program: Dshot300/600/1200
ESC return: Yes
Flight control status indicator: Yes
LED Control Switch: BF LED (4 Set 2812 LED)
F.Port: Yes
RSSI: Yes
Buzzer: Yes
Input voltage: 3~6S Lipo (12.6~25.2V)
TVS power protection: Yes
BEC: 3.3V 0.5A & 5V 3A & 9V 3A
Mounting hole: 30.5mm/M3
Size:38*39*7.5mm
Weight:9.0g

The new upgrade:
Added I2C function (part of GPS/locator, infrared meter)
When connected to USB, receiver and OSD settings can work without external batteries
Increase the pad area, 20*20 flight controller increases the pad area, 30*30 increases the solder joint spacing and increases the spare pad port, reducing the difficulty of welding for beginners
LED signal selection: BF / MAMBA LED (some flight controllers support LED dual signal selection)
BEC short circuit protection
TVS instantaneous high voltage protection (voltage is revised from the original 26V to 30V)
Upgrade the anti-interference cable, basically use Type-c for full coverage
Receiver 5V power supply adds self-recovery insurance
Increase the camera VCC power supply pad
Gyro uses independent, low dropout linear regulators (Low Dropout Regulator) and reduces ripple

Including

1×Diatone MAMBA F405 MK3 Lite FC