Số sản phẩm : 0
Thành tiền : VND
Xem giỏ hàng
Điện thoại hoặc mã đơn hàng

Đang truy cập: 78
Trong ngày: 1736
Trong tuần: 10083
Lượt truy cập: 6002182

















Giá : 8.260.000 VND

Số lượng    

 

Pixhawk 6X (ICM-45686) Flight Controller Standard Set M9N GPS 20295

The Pixhawk® 6X is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6X Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6X, you can find an STMicroelectronics® based STM32H753, paired with sensor technology from Bosch®, InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6X’s H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.

The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.

The Pixhawk® 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. Holybro offers the Pixhawk Baseboard and the Pixhawk Mini-Baseboard, each with different form factor and interfaces.

Note: 

  • The Rev 8 Version is support in PX4 1.14.3 release and later. Ardupilot 4.5.0 stable release and later. Ardupilot firmware can be flash via Mission Planner or QGroundControl.
  • Power module comparison chart

Specification

Processors & Sensors

  • FMU Processor: STM32H753
    • 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
  • IO Processor: STM32F103
    • 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
  • On-board sensors (Shipping Currently, Rev8)
    • Accel/Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
    • Barometer: ICP20100 & BMP388
    • Mag: BMM150
  • On-board sensors (Previous Revision, Rev 3/4)
    • Accel/Gyro: BMI088/ICM-20649
    • Accel/Gyro: ICM-42688-P
    • Accel/Gyro: ICM-42670-P
    • Mag: BMM150
    • Barometer: 2x BMP388

Electrical data

  • Voltage Ratings:
    • Max input voltage: 6V
    • USB Power Input: 4.75~5.25V
    • Servo Rail Input: 0~36V
  • Current Ratings:
    • Telem1 output current limiter: 1.5A
    • All other port combined output current limiter: 1.5A

Mechanical data

  • Dimensions
    • Flight Controller Module: 38.8 x 31.8 x 16.8mm
    • Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
    • Mini Baseboard: 43.4 x 72.8 x 14.2 mm
  • Weight
    • Flight Controller Module: 31.3g
    • Standard Baseboard: 72.5g (Aluminum)
    • Mini Baseboard: 26.5g

Reference Links

SKU 20295 included:

6

- Cách thức mua hàng vui lòng xem tại đây!

- Mua hàng hỗ trợ thanh toán COD quý khách vui lòng mua tại đây!

- Mời bạn tham gia Fanpage để cập nhật sản phẩm mới nhất tại đây!

- Mọi thắc mắc, chi tiết xin vui lòng liên hệ Zalo, SĐT:0938833910

 

smile CÁM ƠN QUÝ KHÁCH ĐÃ TIN TƯỞNG ỦNG HỘ QUÂN PHONG RC smile


Phản hồi

Người gửi / điện thoại

Nội dung

 

Từ khóa
Danh mục
Khoảng giá
Tất cả giá
Dưới 100.000
100.000-500.000
500.000-1.000.000
1.000.000-2.000.000
Trên 2.000.000